- Home
- ยป
- Product Range
- »
- Pressure Calibrator
Pressure Calibrator
Fluke 718Ex Intrinsically Safe Pressure Calibrator
Product Brochure
Brand | Fluke |
Display Type | Digital |
Power | One 9-volt alkaline battery |
Weight | 992 g |
Model | Fluke - 718EX |
Dimension | 216 mm x 94 mm x 66 mm |
Operating temperature | -10 C to 55 C |
Battery life | 4 to 20 hours, depending on functions used |
Loop power supply | 24 V dc |
Features:-
- Built-in pressure/vacuum hand pump, with fine adjust vernier and bleed valve.
- Pressure measurement to 0.05% of full span, using an internal pressure sensor.
- Pressure measurement to 200 bar using any of eight intrinsically safe Fluke 700PEx Pressure Modules.
- The wide range of selectable measurement units for pressure.
- Current measurement with 0.02% accuracy and 0.001 mA resolution.
- Pressure switch test function.
- Min-Max Hold functions.
- Compact size and weight.
- Simple, push-button user interface.
- Rugged and reliable, ideal for field use.
Fluke 717 Pressure Calibrator
Product Brochure
Maximum voltage | 30 volts |
Temperature | -40 C to 60 C |
Operating temperature | -10 C to 55 C |
Relative humidity | 95 % |
Operating altitude | 3,000 m max |
Vibration | Random, 2 g, 5 Hz -500 Hz |
These calibrators come in 9 models measuring pressure up to 5000 psi/345 bar and are compatible with Fluke 700Pxx differential, gauge and absolute pressure modules to increase functionality
Features:-
- Measure pressure, 0.05% of full scale with internal sensor up to 5000 PSI/345 bar sensor (5000G model)
- Measure mA with 0.015% accuracy and 0.001 mA resolution, while sourcing 24V loop power
- Measure pressure to 10,000 psi/700 bar using one of 29 Fluke 700Pxx Pressure Modules
- 1/8 NPT female pressure fitting
- Compatible with non-corrosive Gases and liquids
- Select eleven different engineering units
- Zero, min, max, and hold functions
- Calibrate P/I instruments with simultaneous pressure and current measurement
- Pressure switch test function captures set, reset and Deadband values of a pressure switch
- Error% calculation of mA measurements for quick pass-fail decisions
- Long lasting battery life
- Holster features test lead storage
- Compatible with Toolpack magnetic hanging system
- New switch test
Fluke 719Pro-30G Electric Pressure Calibrator
Product Brochure
Brand | Fluke |
Display Type | Digital |
Model | Fluke 719Pro-30G |
Dimensions | 24.13 cm x 11.18 cm x 7 cm |
Temperature | -50 to 150 C |
Loop power supply | 24 V dc |
Storage Temperature | -20 C to +60 C |
Operating temperature | -10 C to +50 C |
The 719Pro includes a full functioning loop calibrator that sources, simulates and measures mA signals and more making it the ideal test tool for calibrating high accuracy transmitters, pressure switches and pressure gauges.
Get the ultimate in measurement flexibility with the large backlit screen, which displays three parameters at once:
- Pressure measurement from the internal or external sensor
- Sourced/simulated or measured mA values
- The temperature measured by optional RTD probe
Features:-
- Unique integrated electric pump for one-handed pressure calibration
- Test pressure switches easily with easy-to-use switch test function
- Precision pressure adjust vernier for easy and accurate pressure calibration
- Ideal accuracy and performance (0.025 %) for reference class transmitter calibration
- 30 PSI, 150 PSI and 300 PSI pressure ranges
- Programmable pressure calibrator pump limit:
- Eliminates over-pressurization
- Allows the user to program target pressures for pumping
- Extended pressure measurement range with any of 29 700Pxx Pressure Modules
- Pump cleanout ports reduce pump failures from moisture and fluid damage
- Fluid trap included with the unit to mitigate the chance of fluid damage in at-risk applications
- Precision temperature measurement with optional RTD probe
Fluke 719 Electric Pressure Calibrator
Product Brochure
Brand | Fluke |
Weight | 912 g |
Model | Fluke - 719 |
Application | Industrial |
Storage temperature | -30 C to 60 C |
Operating temperature | -10 C to 55 C |
Battery | Two 9 V alkaline batteries |
Battery life | 12 hours with 12 mA into 500 Ohm |
Total pump life | 20,000 calibration cycle |
Now you can calibrate and test pressure devices quickly and easily with one hand, saving valuable time. With the innovative, built-in electric pump, the Fluke 719 Electric Pressure Calibrator provides pressure calibration at your fingertips!
Use the programmable pump limit settings to eliminate over-pressurization, and to set ‘pump to’ pressure values. The unique cleanout port design reduces pump failures and makes the 719 easy to clean without repair. The compact, lightweight form, combined with one-handed calibration, makes this pressure calibrator the ideal tool for busy process professionals.
Pressure calibration made easy, by a name you know and trust for all your process calibration needs.
Features:-
- Electric pump for one-handed pressure calibration
- Best in class pressure measurement uncertainty of 0.025%
- Measure and source mA with best in class 0.015% accuracy
- Precision pressure adjust vernier for accurate pressure calibration
- Variable release rate bleed valve for easy pressure adjustment
- Ideal performance for high accuracy transmitter calibration
- 30 PSI and 100 PSI pressure ranges
- Programmable pressure calibrator pump limit:
- Eliminates over-pressurization
- Allows the user to program target pressures for pumping
- Extended pressure measurement range with any of 29 700Pxx Pressure Modules
- Source mA with simultaneous pressure measurement to test valves and me/Ps
- Simulate mA signals to troubleshoot 4-20 mA loops
- Test pressure switches with built-in switch test function
- Power transmitters during test using 24 V loop supply with simultaneous mA measurement
- Pressure Calibrator includes proven cleanout ports reduce pump failures
Fluke 721Ex Precision Pressure Calibrator
Product Brochure
Brand | Fluke |
Model | Fluke - 721EX |
Display Type | Digital |
Dimension | 20 cm X 11 cm X 5.8 cm |
Batteries required | (4) Standard AA cells |
Altitude | 2,000 meters |
Operating temperature | -10 C to +50 C |
Power requirements | 6.0 v dc |
Features:-
- Intrinsically Safe – IECEx and Atex Ex ia IIB T3 Gb (Zone 1) rated
- Ideal for gas flow calibration (custody transfer) applications
- Two isolated, stainless steel, pressure sensors with 0.025 % accuracy
- Pt100 RTD input for temperature measurement, (probe optional)
- Switch test on both pressure inputs
- Pressure displayed in the user’s choice of 19 engineering units
- Large backlit graphics display can display up to three inputs simultaneously
- Store five instrument setups for recall and use
700PCK Pressure Module Calibration Kit
Brand | Fluke |
Power | 24 V |
PSI Ranges | 10,000 psi/700 bar |
Resolution | 0.001 mA |
Accuracy | 0.02% |
Pressure Modules | 29 Fluke 700Pxx |
Application:
When installed on your PC, the WindowsT-based software easily steps you through an as-found verification, a calibration adjustment, and an as-left verification. Calibration data is captured for import to your database. A 386 or better PC running Windows 3.1 or better is required, along with a precision pressure standard with an uncertainty of less than 1/4 that of the pressure module being verified.
Included: The kit consists of a power supply, an interface adapter, appropriate cables, and Fluke 700PC Pressure Module Calibration Software.