- Home
- ยป
- Product Range
- »
- Digital Clamp Meter
Digital Clamp Meter
Fluke 305 Clamp Meter
Product Brochure
AC Current (Ampere) | 1000 |
AC Voltage (Volt) | 600 |
Model No. | Fluke 305 |
Jaw Open (mm) | 30 mm |
Safety Rating | CAT III 600 V |
Brand | Fluke |
Warranty | 1 Year |
Operating Temperature | 0 to 40 C |
Features:-
- Fluke 305 Compact AC Clamp Meters
- 999.0 A ac current measurement
- CatIV 300V / CATIII 600V safety rated
- 30 mm jaw size for numerous applications
- Resistance range of 40 k
- Slim, ergonomic design is easy to carry and simple to use
- Easy to read backlight display
Keysight Clamp Meter U1190A
Brand | Keysight |
DC Voltage | 600 V |
Display | 6000 Count |
Display Type | Digital |
Product Code | U1190 A |
Current Range | 400 A |
U1190 Series clamp meter fit comfortably in the palm of your hand and allow you to select measurement functions with thumb press. The unique wire separator allows you to effortlessly isolate and perform measurements on individual wires in a bundle. For improved visibility when making measurements, these clamp meters come with integrated LED flashlight that illuminates the test area. These features ensure that you are better equipped when making measurements.
MET/CAL® procedures for the product is available at Cal Lab Solutions, a third-party independent vendor.
Earth Tester with Clamps
Display Type | Digital |
Diode | 1.5 V |
Display Count | 6000 Count |
Clamp Meter Max Current | 600A |
Clamp Min Resolution | 10mA |
Battery | 1.5 V AAA Alkaline battery |
Features:
- Attached Rod Technique (ART)
- Stakeless measurements
- User selectable test frequency
- Dry cell or rechargeable versions
- User selectable output voltage
- Simple one button operation
- Robust carry case
- Backlit display
- Delivered with calibration certificate
Fluke 345 Power Quality Clamp Meter
Product Brochure
Accuracy | +/- 2 % rdg +/-1 pixel |
Voltage Measurement | Ranges 4 V/10 V/20 V/40 V/100 V/200 V/400 V/1000 V |
Resolution | 100 mV in 4 V |
Frequency range | 15 Hz to 1 kHz |
Maximum overload | 1000 V rms |
Dimensions | 300 mm x 98 mm x 52 mm (12 in x 3.75 in x 2 in) |
This clamp-on meter is a combination power analyzer, power quality logger, and clamp meter, and is ideal for monitoring electronic loads.
The Fluke 345 is more than an electric power meter. Combining the functions of a clamp meter, oscilloscope, data logger and digital power meter into one handy device, the Fluke 345 is ideal for working with variable frequency motor drives, high-efficiency lighting and other loads using switching electronics.
One of the leading wattage meters of the world, the multi-faceted Fluke 345 is packed with features such as a bright, color display to analyze the harmonic spectrum, a low-pass filter to remove high frequency noise and a high EMC immunity design, making the Fluke 345 power analyzer ideal for troubleshooting power quality on switching loads. The internal memory of this electric power meter enables long-term power quality logging for analysis of trends or intermittent problems. Additionally, the Hall Effect clamp meter design makes a measurement of dc current possible without the need to break the circuit.
Besides effectively performing basic tasks like measuring wattage, the Fluke 345 power meters offer the ease of use, portability and flexibility needed to resolve most power issues in commercial, industrial and residential settings.
Fluke 355 True-rms 2000 A Clamp Meters
Product Brochure
Jaw size | 58 mm |
Weight | .814 Kg |
Measurement range | 5.0 Hz to 1 kHz |
Dimensions | 300 mm x 98 mm x 52 mm |
Test leads | Rated to 1000 V |
Batteries | Six 1.5 V AA NEDA 15 A or IEC LR6 |
Battery life | 100 hours |
Features:-
- Reliably handle a wide range of high-current applications with 2000 A ac + dc true-rms, 1400 A ac, and 2000 A dc
- The large 58 mm (2.3 in) jaw capacity is suitable for large or multiple conductors
- CATIV 600 V, CATIII 1000 V rating for added user protection
- In-rush current measurement captures 'power-on' surge current with accuracy and repeatability
- The high voltage measurement of 1000 V ac + dc true-rms, 600 Vac, and 1000 V dc allows the user to perform multiple tests with only one tool (355 only)
- Resistance to 400K ohms coupled with a continuity beeper provides the convenience of a multimeter in a clamp meter. (355 only)
- Accurately measure frequency up to 1 kHz for optimum troubleshooting
- Quickly analyze readings using the MIN, MAX, and AVG functions
- A large backlit display allows for easy visibility in low-lit areas
- Use the display hold feature to capture readings even when the display cannot be viewed
- Use the low-pass filter to smooth out noisy loads and stabilize readings
Fluke 362 Clamp Meter
AC Current | 200A |
AC Voltage | 600 V |
Resistance | 300/3000 Ohm |
Model No. | Fluke 362 |
Jaw Open | 18 mm |
Safety Rating | CAT III 600 V |
Brand | Fluke |
Warranty | 1 Year |
Weight | 0.3 Kg |
Features-
Fluke 302 /EM/ESP Clamp Meter
Brand | Fluke |
AC Current | 400 |
AC Voltage | 400/600 |
Resistance | 4000 |
Jaw Open | 30 mm |
Safety Rating | CAT III 600 V |
Resistance range | 4 k |
We are one of the leading wholesale traders of Fluke 302 /EM/ESP Clamp Meter.
The Fluke 302+ comes with all the rugged, reliable and accurate features you have come to trust, in a small, ergonomic design. The innovative body design offers a more compact tool to meet your needs. With features of AC current measurements up to 400 A, a large 30 mm jaw opening and CATIV 300 V/CA III 600 V safety rating, you get an easy-to-use tool that handles your everyday electrical maintenance needs.
Fluke 303/EM ESP Clamp Meter
Brand | Fluke |
DC Current | 600 |
AC Voltage | 400/600 |
Resistance | 4000 |
Model No. | Fluke 303 |
Jaw Open | 30 mm |
Warranty | 1 Year |
Resistance range | 40 k |
Fluke-305/Em Esp Clamp Meter
AC Current | 999.9 |
AC Voltage | 400/600 |
Resistance | 4000 |
Model No. | Fluke 305 |
Jaw Open | 30 mm |
Safety Rating | CAT III 600 V |
Brand | Fluke |
Warranty | 1 Year |
Resistance range | 40 k |
Fluke 317 Digital Clamp Meter
Brand | Fluke |
AC Current | 600 |
AC Voltage | 600 |
Resistance | 4000 |
Model No. | Fluke 317 |
Jaw Open | 37 mm |
Safety Rating | 600V CAT III |
Warranty | 1 Year |
We are one of the leading wholesale traders of Fluke 317 Digital Clamp Meter.
Features-
- Special 40A high accuracy AC/DC high measure, 1.6% accuracy, 0.01A resolution
- Small body and jaws fit perfectly in your hand and into tight places
- Large, backlit display is easy-to-see in less than ideal conditions
- Resolution up to 0.01A and 0.1 V
- Measures AC/DC volts to 600 V
- Resistance measurement to 4000
- Continuity for quick checking of shorts
- Auto-shut-off maximizes battery life so the meter works when you need it
- Display hold function
- One year warranty
Fluke 319 Digital Clamp Meter
Brand | Fluke |
AC Current | 40 A, 600 A, 1000 A |
AC Voltage | 600 |
Resistance | 4000 |
Model No. | Fluke 319 |
Jaw Open | 37 mm |
Safety Rating | 600V CAT III |
Accuracy | 1.6 % |
Warranty | 1 Year |
Resolution | Up to 0.01A and 0.1 V |
We are one of the leading wholesale traders of Fluke 319 Digital Clamp Meter.
Fluke-323/ESPR Clamp Meter
Brand | Fluke |
AC Current | 400 |
AC Voltage | 600 |
Resistance | 4000 |
Model No. | Fluke 323 |
Safety Rating | CAT III 600 V CAT IV 300 V |
Warranty | 1 Year |
We are one of the leading wholesale traders of Fluke-323/ESPR Clamp Meter.
Measurement capability
- 400 A ac current measurement
- 600 V ac and dc voltage measurement
- True-rms ac voltage and current for accurate measurements on non-linear signals
- Resistance measurement up to 4 k with continuity detection
Features
- Slim, ergonomic design
- CATIV 300V/CATIII 600 V safety rating
- Hold button
- Two-year warranty
- Soft carrying case
Fluke-324/ESPR Clamp Meter
Brand | Fluke |
AC Current | 40 A/400 A |
AC Voltage | 600 |
Resistance | 4000 |
Model No. | Fluke 324 |
Jaw Open | 30 mm |
Safety Rating | CAT III 600 V CAT IV 300 V |
Warranty | 1 Year |
We are one of the leading wholesale traders of Fluke-324/ESPR Clamp Meter.
Measurement capability
- 400 A ac current measurement
- 600 V ac and dc voltage measurement
- True-rms ac voltage and current for accurate measurements on non-linear signals
- Resistance measurement up to 4 k with continuity detection
Features
- Slim, ergonomic design
- CATIV 300V/CATIII 600 V safety rating
- Hold button
- Two-year warranty
- Soft carrying case
Fluke -325/ESPR Clamp Meter
Brand | Fluke |
AC Current | 40 A/400 A |
AC Voltage | 600 Volt |
Model No. | Fluke 325 |
Resistance | 40 k |
Jaw Open | 30 mm |
Warranty | 1 Year |
Measurement capability
- 400 A ac current measurement
- 600 V ac and dc voltage measurement
- True-rms ac voltage and current for accurate measurements on non-linear signals
- Resistance measurement up to 4 k with continuity detection
Features
- Slim, ergonomic design
- CATIV 300V/CATIII 600 V safety rating
- Hold button
- Two-year warranty
- Soft carrying case
Fluke-368 Clamp Meter
Brand | Fluke |
AC Current | 3 mA, 30 mA, 300 mA, 3 A, 30 A, 60 A |
Model No. | Fluke 368 |
Jaw Open | 40 mm |
Safety Rating | CAT III 600 V / CAT IV 300 V |
Warranty | 1 Year |
The Fluke 368 FC has a large 40 mm diameter jaw for work with large conductors. The clamp's jaw is fully shielded to accurately capture very small leakage signals and to minimize external electromagnetic interference.
True-rms measurements for accuracy when measuring complex, non-sinusoidal waveforms40 mm jaw openingHighest resolution of 1 A, measure up to 60 ASelectable filter function removes unwanted noiseMax/Min/Average readings and hold functionForward-facing LED work light for use in dark wiring cabinetsBacklit display; auto backlight off and auto power off for extended battery life
Fluke-373 Clamp Meter
AC Current | 600 Ampere |
AC Voltage | 600 Volt |
Model No. | Fluke 373 |
Resistance | 6000 Ohm |
Safety Rating | 600V CAT III, 300V CAT IV |
Brand | Fluke |
Warranty | 1 Year |
Qualities
- 600 A ac current measurement with fixed jaw
- 600 V ac and dc voltage measurement
- State of the art signal processing allows for use in noisy electrical environments while providing stable readings
- CATIV 300 V, CATIII 600 V
- True-rms ac voltage and current for accurate measurements on non-linear signals
- Large, easy to read backlight display automatically sets the correct measurement range so you do not need to change the switch positions while taking a measurement
- Three-year warranty
- Soft carrying case
Fluke 374 Clamp Meter
Brand | Fluke |
DC Current | 600 Ampere |
AC Current | 600 (with iflex 2500 A) |
AC Voltage | 600 Volt |
Model No. | Fluke 374 |
Jaw Open | 34 mm |
Safety Rating | 1000V CAT III, 600V CAT IV |
Warranty | 1 Year |
Features:-
- iFlex flexible current probe (sold separately) expands the measurement range to 2500 A ac while providing increased display flexibility, ability to measure awkward sized conductors and improved wire access
- CATIV 600 V, CATIII 1000 V
- Proprietary inrush measurement technology to filter out the noise and capture motor starting current exactly as the circuit protection sees it
- Ergonomic design fits in your hand and can be used while wearing personal protective equipment
- Large, easy to read backlight display automatically sets the correct measurement range so you do not need to change the switch positions while taking a measurement
- Three-year warranty
- Soft carrying case
Fluke-375 Clamp Meter
Brand | Fluke |
DC Current | 600 Ampere |
AC Current | 600 (with iflex 2500A) |
AC Voltage | 600 Volt |
Model No. | Fluke 375 |
Resistance | 60 k Ohm |
Jaw Open | 34 mm |
Safety Rating | 1000V CAT III, 600V CAT IV |
Warranty | 1 Year |
Features
- iFlex flexible current probe expands the measurement range to 2500 A ac while providing increased display flexibility, ability to measure awkward sized conductors and improved wire access.
- CATIV 600 V, CATIII 1000 V
- True-rms ac voltage and current for accurate measurements on non-linear signals
- 500 mV dc measurement range to interface with other accessories
- Integrated low pass filter and state of the art signal processing allows for use in noisy electrical environments while providing stable readings
- Proprietary inrush measurement technology to filter out a noise and capture motor starting current exactly as the circuit protection sees it
- Ergonomic design fits in your hand and can be used while wearing protective equipment
- Large, easy to read backlight display automatically sets the correct measurement range so you do not need to change the switch positions while taking a measurement
- Three-year warranty
- Soft carrying case
Fluke 376 True-rms AC/DC Clamp Meter with iFlex
Brand | Fluke |
Jaw Open | 34 mm |
Model No. | Fluke 376 |
AC Current | 999.9 A (with iflex 2500 A) |
AC Voltage | 1000 Volt |
Resistance | 60 k |
Safety Rating | 1000V CAT III, 600V CAT IV |
Dimension | 246 mm x 83 m x 43 mm |
The Fluke 376 Clamp Meter offers improved performance perfect for a wide range of current measurement situations. With true-rms voltage and current measurements, the Fluke 376 can read up to 1000 V and 1000 A in both ac and dc modes.
Additionally, the Fluke 376 includes the new iFlex(TM) flexible current probe, which expands the measurement range to 2500 A ac while providing increased display flexibility, ability to measure around awkward sized conductors and improved wire access. The Fluke 376 is the direct replacement for the Fluke 337 Clamp Meter.
Features-
- iFlex flexible current probe expands the measurement range to 2500 A ac
- CATIV 600 V, CATIII 1000 V
- True-rms ac voltage and current for accurate measurements on non-linear signals
- Min, max, average and inrush recording to capture variations automatically
- Integrated low pass filter and state of the art signal processing allows for use in noisy electrical environments while providing stable readings
- Proprietary inrush measurement technology to filter out the noise and capture motor starting current exactly as the circuit protection sees it
- Ergonomic design fits in your hand and can be used while wearing protective equipment
- Large, easy to read backlight display automatically sets the correct measurement range so you do not need to change the switch positions while taking a measurement
- Three-year warranty
- Soft carrying case
Fluke 381 True-rms AC/DC Clamp Meter with iFlex
Brand | Fluke |
Jaw Open | 34 mm |
Model No. | Fluke 381 |
AC Current | 999.9 A / 2500 A |
Resistance | 60 k |
Safety Rating | 1000V CAT III, 600V CAT IV |
The Fluke 381 does everything you would expect from a clamp meter, and then lets you remove the display for even more flexibility. Now one technician can do jobs that used to require two people. Clamp the Fluke 381 around a conductor, remove the display and walk across the room to operate controls or remove protective equipment, all while watching real-time readings.
The iFlex flexible current probe (included) expands the measurement range to 2500 A ac while providing increased display flexibility, ability to measure awkward sized conductors and improved wire access.
Features-
- Wireless technology allows the display to be carried up to 30 ft. away from the point of measurement for added flexibility without interference with measurement accuracy
- The removable magnetic display can be conveniently mounted where it is easily seen
- iFlex flexible current probe expands the measurement range to 2500 A ac
- CATIV 600 V, CATIII 1000 V
- Integrated low pass filter and state of the art signal processing allows for use in noisy electrical environments while providing stable readings
- Proprietary inrush measurement technology to filter out the noise and capture motor starting current exactly as the circuit protection sees it
- Ergonomic design fits in your hand and can be used while wearing protective equipment
- Radio transmitter automatically sets the correct measurement range so you do not need to change the switch positions while taking a measurement
- Three-year warranty
- Soft carrying case
Fluke 771 Milliamp Process Clamp Meter
Brand | Fluke |
AC Current | 0 to 20.99 mA |
Model No. | Fluke 771 |
Warranty | 1 Year |
Weight | 1.17 pounds |
Dimension | 14 x 10 x 8 inches |
The 771 mA Clamp Meter features:
- Best in class 0.2 % accuracy
- 0.01 mA resolution and sensitivity
- Measure 4 to 20 mA signals without ”breaking the loop”
- Measure mA signals for PLC and control system analog I/O
- Dual backlit display with both mA measurement and percent of 4 to 20 mA span
- Measurement Spotlight illuminates hard to see wires in dark enclosures
- Detachable clamp with the extension cable for measurements in tight locations
- Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
- Automatically change the 4 to 20 mA output for remote testing
- Power saving features, auto-off, backlight timeout extend battery life
- Hold function captures and displays changing measurements